EZ™️ Paint Roller Cleaner

Cleans Paint Rollers In Seconds Using a Drill!

• Clean Paint Rollers Fast.

• Stop throwing away salvageable dirty paint rollers and save time and money!

EZ Paint Roller Cleaner will completely clean your roller in mere seconds using any cordless drill and some water.

ABOUT THE PRODUCT：

✔️  EZ Paint Roller Cleaner is a convenient tool that makes cleaning paint rollers quick and easy.

✔️  It helps you save time and effort by eliminating the need for manual cleaning and messy cleanup.

✔️  It is compatible with most standard-sized paint roller covers, allowing you to clean a wide range of rollers.

✔️  With its compact and lightweight design, it is easy to handle and store.

✔️  It helps extend the lifespan of your paint rollers by thoroughly removing paint residue and preventing buildup.

EZ™️ Paint Roller Cleaner Paint Roller Cleaner cleans dirty paint rollers in seconds. The Large Plastic DIY model is intended for the do-it-yourselfer and casual painter. The tool is a solid piece of standard plastic that cleans rollers up to 12" long.

The concept is simple: use the EZ Cleaner as you would any drill bit and attach it to any cordless drill, then connect your dirty paint roller over the Roller Ready, dip it into a bucket of water, and turn your drill on.

Specifications:

Customer questions & answers:

Q. Does it work with oil-based paint?

A. You must soak the roller in mineral spirits to make it work; Latex paints are best because the water in a bucket is cheap and easy.

Q. Does this work with Wagner smart roller tool roller brushes?

A. Yes. If it fits on the roller, it will work.

Q. What drive in my drill is needed to run the EZ Cleaner?

A. If you are referring to the speed setting of the drill, it would be set on the highest level of drilling speed. If you are referring to the size of the shaft, it would be 3/8 minimum.

Q. Hello. If I understand well, I must open my dirty paint roller to use this tool?

A. You take the freshly used roller off the roller handle and install it onto the tool which is already mounted in the drill. I usually do this after emptying my paint pan back into the can and cleaning it. Typically I hold it down while removing it from the roller with my 5-way after scraping and then hold it upright to be able to then install on onto the tool.

Q. Does the roller ready come in metal, or is it just plastic?

A. Hard nylon

Reuse your rollers again and again; get the most out of your tools and money! 

GET YOURS BY CLICKING ADD TO CART BUTTON

OUR GUARANTEE